American Panel Blast Chiller BCIP - Manual (Page 21)

PROGRAMMING
19
The controller will ask the operator to enter the access code. Press, in order and within
20 seconds, the following combination Ж Ж . When done, confirm by
pressing .
Note: If the entered access code is not correct, the controller will ask the operator to re-enter the code. Wait five seconds
and then re-enter the access code.
If the correct code is entered, the controller will give a short beep and display the message:
To skip press . To change the access code press, in order and within 20 seconds,
a three button combination using , , , , . For example, press
Ж Ж .
The controller will display the new access code.
Press to confirm the new access code.
Next, the controller will ask the operator to set the current year. Use and
buttons to scroll thru the year settings. Press when done.
The controller will ask the operator to set the current month. Use and buttons
to scroll thru the month settings. Press when done.
Use and buttons to scroll thru the date settings. Press when done.
The controller will ask the operator to change the hour setting. To skip the time
changing procedure press . The controller will jump to the PC Connection setting
screen.
To change the hour setting, use and buttons. When done, press button
to move to the next screen.
The controller will ask the operator to change the minute setting. Use and
buttons to change the minute. When done, press button to move to the next
screen.
Use and buttons to change PM/AM setting. Press when done.
The display will show:
Use and buttons to chose Yes or No. Select “YES”, only if you purchased the
PC connection kit, otherwise select “NO”. Press when done.