American Panel Blast Chiller BCIP - Manual (Page 8)

INSTALLATION
6
B.2.2. Install Fan Assembly Frame
1. Insert the fan assembly frame into the door hinge side of the box with the fans facing the interior of the box (see
DRAWING # 4). Push the assembly tight to the side wall leaving ¼” space at the front and rear panels.
Note the three holes on the stainless steel angle frame (at the top of the horizontal cross brace on the vertical
surface at the back of the frame). Drill 1/8” pilot holes into the back panel of the box.
2. Secure the frame to the back of the box with self-tapping 8/32” stainless steel screws (see DRAWING # 3, page 5)
DRAWING # 4