Aastra Telecom SIP 480I - Manual (Page 373)

Operational, Basic, and Advanced Parameters
41-001129-00 Rev 09, Release 1.4.1 A-83
Configuration Parameters
Appendix A
Parameter –
sip intercom prefix code
Prefix Code
(in Web UI)
Aastra Web UI Basic Settings->Preferences->
Outgoing Intercom Settings
Configuration Files aastra.cfg, <mac>.cfg
Description The prefix to add to the phone number for server-side outgoing Intercom
calls. This parameter is required for all server-side Intercom calls.
Note: The example below shows *96 for the prefix code which is used for
Sylantro servers.
Format String
Default Value N/A
Range N/A
Example sip intercom prefix code: *96
Parameter –
sip intercom line
Line
(in Web UI)
Aastra Web UI Basic Settings->Preferences->
Outgoing Intercom Settings
Configuration Files aastra.cfg, <mac>.cfg
Description Specifies the line for which the IP phone uses the configuration from,
when making the Intercom call. The IP phone uses the first available line
for physically making the call but uses the configuration from the line you
set for this parameter.
Note: The "sip intercom type" parameter must be set with the Server-Side
option to enable the "sip intercom line" parameter.
Format Integer
Default Value 1
Range Line 1 through 9
Example sip intercom line: 1