Troubleshooting parameters, Troubleshooting, Parameters – Aastra Telecom SIP 480I User Manual
Page 397: Appendix a
Troubleshooting Parameters
41-001129-00 Rev 09, Release 1.4.1
A-107
Configuration Parameters
Appendix A
Troubleshooting Parameters
The following parameters in this section allow the system admininstrator to set
logging and support settings for troubleshooting purposes.
Parameter –
log ip
Aastra Web UI
Advanced Settings->Troubleshooting
Configuration Files
aastra.cfg, <mac>.cfg
Description
Specifies the IP address for which to save log files for troubleshooting
purposes.
Format
IP address
Default Value
0.0.0.0
Range
Not Applicable
Example
log ip: 192.168.3.2
Parameter –
log port
Aastra Web UI
Advanced Settings->Troubleshooting
Configuration Files
aastra.cfg, <mac>.cfg
Description
Specifies the IP port to use to save log files for troubleshooting purposes.
This is the IP port that transmits information from the IP phone to the IP
address location.
Format
Integer
Default Value
0
Range
Any valid IP port
Example
log port: 2