Aastra Telecom SIP 480I - Manual (Page 420)

Sample Configuration Files
D-8 41-001129-00 Rev 09, Release 1.4.1
IP Phone Administrator Guide
Appendix D
#sip dial plan terminator: 1 # enable sending of the "#" symbol to
# to the proxy in the dial string
#------------------------------------------------------------------
# General SIP Settings
# = = = = = = = = = = =
#sip session timer: 30 # enable support of RFC4028, the default
# value of 0 disables this functionality
#sip transport protocol: 0 # use UDP (1), TCP (2) or both (0) for sip
# messaging
#sip use basic codecs: 1 # limit codecs to G711 and G729
#sip out-of-band dtmf: 0 # turn off support for RFC2833 (on by
# default)
# Global SIP User Settings
# ==========================
#
# Notes:
# These settings are used as the default configuration for the hard
# key lines on the phone. That is:
#
# L1 to L4 on the 480i and 480iCT
# L1 to L3 on the 9133i
# L1 on the 9112i
#
# These can be over-ridden on a per-line basis using the per-line
# settings.
#
# See the Admin Guide for a detailed explaination of how this works