Aastra Telecom SIP 480I - Manual (Page 90)

Advanced Network Settings
4-34 41-001129-00 Rev 09, Release 1.4.1
IP Phone Administrator Guide
Configuring the IP Phones
Setting Time/Date on IP Phones
In addition to enabling/disabling the time server, you can also set the time and
date, set the time and date format, set the time zone, and set daylight savings time
on the IP phones. You configure these features using the configuration files, the IP
Phone UI, or the Aastra Web UI. The following table identifies which method of
configuration applies to each feature.
Use the following procedures to set a time and date, time and date format, time
zone, and daylight savings time on the IP phones.
3 Enter an IP address or qualified domain name in the "Time Server 1", "Time Server 2", and/or
"Time Server 3" field(s) to specify the location of the NTP time server.
Note: To enable/disable time serving, set the time/date format, and set the time zone, see “Time
Server Settings” on page A-23. These parameters can be set using the configuration files only.
4 Click to save your changes.
Feature Method of configuration
Set Time IP Phone UI
Set Time Format IP Phone UI
Configuration Files
Set Date IP Phone UI
Set Date Format IP Phone UI
Configuration Files
Set Time Zone IP Phone UI
Configuration Files
Set Daylight Savings Time IP Phone UI
Configuration Files
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Time and Date
Settings” on page A-25.
Aastra Web UI
Step Action