Aastra Telecom SIP 480I - Manual (Page 391)

Softkey/Programmable Key Parameters
41-001129-00 Rev 09, Release 1.4.1 A-101
Configuration Parameters
Appendix A
Range line (9133i only)
speeddial
dnd ("do not disturb" in the Aastra Web UI)
blf (9133i only)
list (9133i only; Aastra Web UI only)
xml
flash
park
pickup
lcr
Example prgkey1 type: speeddial
Parameter –
prgkeyN value
Value
(in Web UI)
Aastra Web UI Operation->Programmable Keys
Configuration Files aastra.cfg, <mac>.cfg
Description This is the value you assign to the programmable key.
The “prgkeyN value” parameter can be set for the following softkey types
only:
•
speeddial
• line
• BLF
• spre
• XML
• Park
• Pickup
Notes:
1..
For speedial - Value is the phone number or extension to enter for
the programmable key.
2. For line (9133i only) - Value is optional; for example L4.
3. For blf (9133i only) - Value is the extension you want to monitor.
4. For spre - Value is dependent on services offered by server.
5. For xml - Value is IP address of the XML application.
6. For Park, Pickup - For valid values, see Chapter 5, the section,
“Park/Pickup Call Server Configuration Values” on page 5-46 . For
Park/Pickup examples, see Chapter 5, the section, “Model 9112i
Examples” on page 5-51 or “Model 9133i Examples” on page 5-51.
Format Integer
Default Value N/A
Range N/A
Example prgkey1 value: 411