Hard keys, Enabling/disabling redial, xfer, and conf keys, Hard keys -9 – Aastra Telecom SIP 480I User Manual

Page 121: Operational features

Advertising
background image

Operational Features

41-001129-00 Rev 09, Release 1.4.1

5-9

Operational Features

Operational Features

Hard Keys

There are hard keys on your phone, such as Hold, Redial, Xfer, Icom and Conf
(Hold and Icom not available on the 9112i and 9133i) that are configured for
specific call-handling features. (See the product-specific User Guide for more
information about the hard key functions).

Enabling/Disabling Redial, Xfer, and Conf Keys

You can enable or disable the Redial, Xfer, and Conf hard keys as required using
the following parameters in the configuration files:

redial disabled

conference disabled

call transfer disabled

Valid values for this parameter are 0 (enabled) and 1 (disabled).

If this parameter is set to 1, the key is not active and is ignored if pressed by the
user. For "redial disabled" the value of 1 does not save the dialed number to the
"Redial List".

If this parameter is set to 0, the key is active and can be pressed by the user.

This feature is configurable via the configuration files only.

Use the following procedure to enable/disable the Redial, Xfer, and Conf keys.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section,

“Hard Key

Parameters”

on

page A-90..

Advertising
This manual is related to the following products: