Audio transmit and receive gain adjustments, Audio transmit and receive gain adjustments -116, Operational features – Aastra Telecom SIP 480I User Manual

Page 228

Advertising
background image

Operational Features

5-116

41-001129-00 Rev 09, Release 1.4.1

IP Phone Administrator Guide

Operational Features

Audio Transmit and Receive Gain Adjustments

The audio gain properties for the IP phone handset, headset, and speakerphone is
adjusted to reduce side-tone and echo on the local and far-end equipment. You can
adjust these settings from -10 db to +10 db to best suit your comfort level and
deployment environment by using the following parameters in the configuration
files:

headset tx gain

headset sidetone gain

handset tx gain

handset sidetone gain

handsfree tx gain

audio mode

The default setting for these parameters is 0 (zero).

The following table describes each parameter.

Note:

Aastra Telecom recommends you leave the default of 0 (zero) as

the settings for these parameters.

Parameter

Description

Headset tx gain

The increased (+db) or decreased (-db) amount of signal transmitted from
the headset microphone to t he far-end party.

Headset sidetone gain

The increased (+db) or decreased (-db) amount of sidetone signal from the
headset microphone to the headset speaker.

Handset tx gain

The increased (+db) or decreased (-db) amount of signal transmitted from
the handset microphone to the far-end party.

Handset sidetone gain

The increased (+db) or decreased (-db) amount of sidetone signal from the
handset microphone to the handset speaker.

(continued)

Advertising
This manual is related to the following products: