Enabling/disabling the aastra web ui, Enabling/disabling the aastra web ui -9, Configuration interface methods – Aastra Telecom SIP 480I User Manual
Page 33
Aastra Web UI
41-001129-00 Rev 09, Release 1.4.1
2-9
Configuration Interface Methods
Configuration Interface Methods
Enabling/Disabling the Aastra Web UI
The Aastra Web UI is enabled by default on the IP phones. A System
Administrator can disable the Aastra Web UI on a single phone or on all phones if
required using the configuration files. Use the following procedure to enable and
disable the Aastra Web UI.
To disable the Aastra Web UI:
Configuration Files
Step Action
1
Using a text-based editing application, open the <mac>.cfg file if you want to disable the Web UI on a
single phone. Open the aastra.cfg file to disable the Web UI on all phones
2
Enter the following parameter:
web interface enabled: 0
Note: A value of zero (0) disables the Web UI on the phone. A value of 1 enables the Web UI.
3
Save the changes and close the <mac>.cfg or the aastra.cfg file.
4
Restart the phone to apply the changes. The Aastra Web UI is disabled for a single IP phone or for all
phones.