Nortel networks nat, Configuring nortel nat (optional), Configuring nortel nat (optional) -17 – Aastra Telecom SIP 480I User Manual
Page 73: Configuring the ip phones
Advanced Network Settings
41-001129-00 Rev 09, Release 1.4.1
4-17
Configuring the IP Phones
Configuring the IP Phones
Nortel Networks NAT
Nortel Networks provides a proprietary solution to support connectivity to their
proxies from phones placed behind devices (such as routers or firewalls) that use
NAT. Nortel uses the SIP ping request/reply between the Nortel proxy and the
phone in order to keep the connection through the router or firewall active. A SIP
Nortel NAT timer is the interval, in seconds (default is 60), that the phone sends
SIP ping requests to the Nortel proxy.
Configuring Nortel NAT (optional)
You can configure Nortel NAT using the configuration files, the IP phone UI, or
the Aastra Web UI.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
Address Translation (NAT) Settings”
on
IP Phone UI
Step Action
1
For 9112i/9133i:
Press
I
on the phone to enter the Options List.
For 480i/480i CT:
Press
% on the phone to enter the Options List.
2
Select SIP Settings.
3
Select NAT.
4
Select Nortel.
5
Select NAT Enabled.