Microsoft onnow – American Megatrends X6DVA-EG User Manual

Page 18

Advertising
background image

1-12

Introduction

X6DVA-4G/X6DVA-EG User's Manual

such as CD-ROMs, network cards, hard disk drives and printers. This also

includes consumer devices connected to the PC such as VCRs, TVs, tele-

phones and stereos.

In addition to enabling operating system-directed power management, ACPI

provides a generic system event mechanism for Plug and Play and an oper-

ating system-independent interface for configuration control. ACPI lever-

ages the Plug and Play BIOS data structures while providing a processor

architecture-independent implementation that is compatible with Windows

2000, Windows NT 5.0, Windows XP, and Windows Server 2003 .

Microsoft OnNow

The OnNow design initiative is a comprehensive, system-wide approach to

system and device power control. OnNow is a term for a PC that is always

on but appears to be off and responds immediately to user or other re-

quests.

Slow Blinking LED for Suspend-State Indicator

When the CPU goes into a suspend state, the chassis power LED will start

blinking to indicate that the CPU is in suspend mode. When the user presses

any key, the CPU will wake-up and the LED will automatically stop blinking

and remain on.

Main Switch Override Mechanism

When an ATX power supply is used, the power button can function as a

system suspend button to make the system enter a SoftOff state. The

monitor will be suspended and the hard drive will spin down. Pressing the

power button again will cause the whole system to wake-up. During the

SoftOff state, the ATX power supply provides power to keep the required

circuitry in the system alive. In case the system malfunctions and you want

to turn off the power, just press and hold the power button for 4 seconds.

This option can be set in the Power section of the BIOS Setup routine.

External Modem Ring-On (WOR)

Wake-up events can be triggered by a device such as the external modem

ringing when the system is in the SoftOff state. Note that external modem

ring-on can only be used with an ATX 2.01 (or above) compliant power

supply.

Advertising
This manual is related to the following products: