American Megatrends X6DVA-EG - Manual (Page 71)

Chapter 4: AMI BIOS
4-19
Quiet Boot
Set this value to allow the boot up screen options to be modified between
POST messages or OEM logo. The default setting is Enabled. Select Dis-
abled to allow the computer system to display the POST messages. Select
Enabled to allow the computer system to display the OEM logo.
Add-On ROM Display Mode
Set this option to display add-on ROM (read-only memory) messages. The
default setting is Force BIOS. Select "Force BIOS" to allow the computer
system to force a third party BIOS to display during system boot. Select
"Keep Current" to allow the computer system to display the BIOS informa-
tion during system boot. The options are Force BIOS and Keep Current.
Boot up Num-Lock
Set this value to allow the Number Lock setting to be modified during boot
up. The default setting is On. The options are On and Off.
PS/2 Mouse Support
Set this value to allow the PS/2 mouse support to be modified. The options
are Auto, Enabled and Disabled.
Wait for ‘F1’ If Error
Select Enable to activate the function of Wait for F1 if Error. The options are
Enabled and Disabled.
Hit ‘DEL’ Message Display
Select Enabled to display Setup Message when the user hits the DEL key.
The options are Enabled and Disabled.
Interrupt 19 Capture
Select Enabled to allow ROMs to trap Interrupt 19. The options are Enabled
and Disabled.
Quick Boot
If Enabled, this option will skip certain tests during POST to reduce the time
needed for the system to boot up. The options are Enabled, and Disabled.
X X X X X
BIOS Settings Configuration