Chapter 2 installation, 1 static-sensitive devices – American Megatrends X6DVA-EG User Manual
Page 21
Chapter 2: Installation
2-1
Chapter 2
Installation
2-1
Static-Sensitive Devices
Electric-Static-Discharge (ESD) can damage electronic components. To pre-
vent damage to your system board, it is important to handle it very carefully.
The following measures are generally sufficient to protect your equipment
from ESD.
Precautions
•
Use a grounded wrist strap designed to prevent static discharge.
•
Touch a grounded metal object before removing the board from the anti-
static bag.
•
Handle the board by its edges only; do not touch its components, periph-
eral chips, memory modules or gold contacts.
•
When handling chips or modules, avoid touching their pins.
•
Put the motherboard and peripherals back into their antistatic bags when
not in use.
•
For grounding purposes, make sure your computer chassis provides ex-
cellent conductivity between the power supply, the case, the mounting
fasteners and the motherboard.
•
Use only the correct type of onboard CMOS battery as specified by the
manufacturer. Do not install the onboard battery upside down to avoid
possible explosion.
Unpacking
The motherboard is shipped in antistatic packaging to avoid static damage.
When unpacking the board, make sure the person handling it is static protected.