American Megatrends X6DVA-EG - Manual (Page 67)

Chapter 4: AMI BIOS
4-15
X
Event Log Configuration
Highlight this item and press <Enter> to view the contents of the event log.
View Event Log
This feature allows the user to view all unread events.
Mark All Events as Read
Highlight this item and press <Enter> to mark the DMI events as read.
Clear Event Log
This setting will clear all event logs when set to "OK". The options are
"OK" and "Cancel".
ECC Event Logging
This setting allows you to enable or disable ECC Event logging. The options
are Enabled or Disabled.
Hub Interface Event Logging
This setting allows you to enable or disable Hub Interface Event logging.
The options are Enabled or Disabled.
System Bus Event Logging
This setting allows you to enable or disable System Bus Error Event logging.
The options are Enabled or Disabled.
Memory Buffer Event Logging
This setting allows you to enable or disable Memory Buffer Event logging.
The options are Enabled or Disabled.
PCI/PCI Express Error Logging
This setting allows you to enable or disable PCI or PCI Express Error logging.
The options are Enabled or Disabled.
X
MPS Configuration
This section allows the user to configure the multiprocessors table.
MPS Revision
This feature allows the user to select MPS Revision. Please follow the
instructions given on the screen to select the MPS Revision Number. The
options are 1.1 and 1.4.