PSA PIN388D/PIN388L User Manual - Manual (Page 22)

PINKERTON User Manual
20
AWAY mode (using Super Codes)
WHAT ARE SUPER CODES?
The Super Codes option allows the Master Code holder to issue user codes
with limited functions to some users of the PINKERTON alarm system.
SUPER CODE OPERATION
If your installer has enabled the Super Codes option, User Codes will operate
as follows:
The Master User Code operates normally (as per page 17).
Enter followed by the MASTER CODE then to turn alarm
ON.
Enter MASTER CODE then

to turn alarm OFF.
Or Enter followed by the MASTER CODE then [any digit] for access
to all allowable functions.
Users Codes 2 to 15 operate as below and can only turn the alarm ON and
OFF.
Enter then USER CODE to turn alarm ON.
Enter then USER CODE to turn alarm OFF.
PURPOSE OF SUPER CODES
The Super Codes option was introduced for two reasons.
Some users prefer the option of simply entering their four digit user code to
turn ON or OFF without the requirement to enter the fifth, command digit.
If you have multiple users each with their own user code, you may not want to
allow all the users to have access to other PINKERTON functions such as
Review Memory, Isolation, Walk Test, etc. These users should be allocated a
user code from 2 to 15.
Holders of codes 2 to 15 still have access to the keypad Panic facility by
pressing