King Kooker Cast Cooker - Manual (Page 11)

11
Figure 4
double Hose WItH mAle FIttInGs And mAnuAl VAlVes WItH non-
AdjustAble Pressure reGulAtor.
Tighten the hose
fittings into the venturis
with a torque wrench,
up to a torque of 95 to
105 lb./in.
Alternatively, hand
tighten securely and
then, using a wrench,
tighten an additional
1-1 1/2 turns.
note: If your cooker has attachable legs or work table, or requires additional construction, follow
the assembly instructions for these before proceding to the use and care section.
20 lb. LP
Gas Cylinder
Figure 3
Hose WItH mAle or FemAle FIttInG And mAnuAl VAlVe WItH
non-AdjustAble Pressure reGulAtor.
If your cooker has a manual valve and a non-adjustable pressure regulator as above with a 1/8
male pipe thread, refer to directions in Figure 1.
If your cooker has a manual valve and a non-adjustable pressure regulator as above, but a 3/8
female flare swivel, refer to the directions for Figure 2.
5. Go to the use and care section for further instructions.
n0n-AdjustAble
mAnuAl VAlVe
mAnuAl VAlVes
WItH orIFIce