King Kooker Cast Cooker - Manual (Page 13)

13
18Kd, 21Kd, ss21PKd And 24Wc
Assembly InstructIons
contents
(1) top ring (3 holes for leg attachment)
(1) bottom ring (6 holes for leg and foot extension attachment)
(3) legs
(1) shroud
(1) casting/Air shutter
(1) Hose/regulator
(3) Foot extensions
(15) bolts, lockwashers and nuts
tools needed
Adjustable Wrench
screwdriver
legs bolt to outside of top and bottom rings
(6 bolts, nuts and lockwashers).
legs bolt to inside of shroud (6 bolts, nuts,
and lockwashers).
Foot extensions bolt to outside of bottom
ring (3 bolts, nuts and lockwashers).
1
1
2
2
3
3
1) Assemble bolts, washers and nuts as per diagram.
2) Wrench tighten. Make sure all bolt sets are used
and unit stands sturdily.
3) Go to pg. 9 for casting installation instructions.
1) Assemble bolts, washers and nuts as per diagram.
2) Wrench tighten. Make sure all bolt sets are used
and unit stands sturdily.
3) Go to pg. 9 for casting installation instructions.
1212, 1214, 1642, And 2616
Assembly InstructIons
contents
(1) bottom ring
(3) legs
(1) Flat bar casting support bracket
(1) shroud with Welded top ring
(1) casting/Air shutter
(1) Heat Plate (models 1212 and 1214 only)
(1) Hose/regulator
(13) bolts, lockwashers and nuts
tools needed
Adjustable Wrench
screwdriver
legs bolt to outside of bottom ring
(3 bolts, nuts and lockwashers).
legs bolt to outside of shroud
(6 bolts, nuts, and lockwashers).
Flat bar casting support bracket
bolts to inside of shroud
(4 bolts, nuts and lockwashers).
nut
lock Washer
Foot extension
bolt
* model may Vary From Picture
* model may Vary From Picture
leg
Flat bar
casting support
bracket
bottom ring
shroud
with Welded
top ring