King Kooker Cast Cooker - Manual (Page 14)

14
5012, 5212 And 1015
Assembly InstructIons
1) Assemble bolts, washers and nuts as per diagram.
2) Wrench tighten. Make sure all bolt sets are used
and unit stands sturdily.
3) Go to pg. 9 for casting installation instructions.
1
2
3
4
contents
(1) bottom ring
(3) legs
(1) Flat bar casting support bracket
(1) shroud with Welded top ring
(1) casting/Air shutter
(1) Heat Plate
(1) Hose/regulator
(3) Foot extensions
(16) bolts, lockwashers and nuts
tools needed
Adjustable Wrench
screwdriver
legs bolt to outside of bottom ring (3
bolts, nuts and lockwashers).
legs bolt to outside of shroud (6 bolts,
nuts and lockwashers).
Foot extensions bolt to outside of
bottom ring (3 bolts, nuts and
lockwashers).
Flat bar casting support bracket bolts
to inside of shroud (4 bolts, nuts and
lockwashers).
* model may Vary From Picture
leg
bottom
ring
Foot
extension
Flat bar casting
support bracket
shroud
with Welded
top ring
1644 And 1645 Assembly InstructIons
contents
(1) top ring
(1) bottom ring
(3) legs
(1) Flat bar casting support bracket
(1) shroud
(1) casting/Air shutter
(1) Hose/regulator
(16) bolts, lockwashers and nuts
tools needed
Adjustable Wrench
screwdriver
legs bolt to outside of top and bottom rings
(6 bolts, nuts and lockwashers).
legs bolt to inside of shroud (6 bolts, nuts,
and lockwashers).
Flat bar casting support bracket bolts to
inside of shroud (4 bolts, nuts and
lockwashers).
1
2
3
1) Assemble bolts, washers and nuts as per diagram.
2) Wrench tighten. Make sure all bolt sets are used
and unit stands sturdily.
3) Go to pg. 9 for casting installation instructions.
* model may Vary From Picture
leg
bottom
ring
top
ring
Flat bar casting
support bracket