Initial setup, Adding refrigerant to the internal storage vessel, Warning – Robinair AC375C Refrigerant Recovery, Recycle, Recharge Unit User Manual

Page 12

Advertising
background image

© 2006 SPX Corporation

10

Add refrigerant to the internal storage vessel (ISV) after adding oil to the
vacuum pump. After the initial refrigerant fill, refill the ISV as necessary.
(Refer to Adding Additional Refrigerant to the ISV.) The AC375C is shipped
as an R-12 refrigerant unit. Use the following steps to dedicate the unit to
R-134a refrigerant and add refrigerant to the internal storage vessel.

Wear safety goggles when working with refrigerant. All hoses
may contain liquid refrigerant under pressure. Disconnect
hoses using extreme caution. Read and follow all warnings at

the beginning of this manual before operating the unit.

WARNING

Initial Setup

INST0986

Adding Refrigerant to the Internal Storage Vessel

CAUTION: Use
only one type of
refrigerant
(either
R-134a or R-12)
in the unit. Do
not mix
refrigerant types
through a
system or in the
same container;
mixing of
refrigerants will
cause severe
damage both to
the unit and the
vehicle air
conditioning
system. Do not
attempt to adapt
the unit for an-
other refrigerant.

Source Tank

Compartment

Source

Tank Strap

R-134a

High-Side Hose

Storage Fitting

R-134a

Low-Side Hose

Storage Fitting

Unit Components - Side View

Advertising