SKC Limited Pocket Pump MTX - Manual (Page 13)

www.skcltd.com 210-PMTXM Issue F Page 11
Getting Started
2) Battery Status Indicator
The battery status indicator on the pump LCD screen shows the current battery charge level:
Fully charged. 3 bars displayed from approximately 100% to 75% capacity. Note: It is strongly
recommended to ensure that the battery is fully charged before starting a sample run.
2 bars displayed from approximately 75% to 25% capacity.
1 bar displayed below approximately 25% capacity.
Low battery. No bars and flashing outline indicates low battery. Pump automatically switches
to HOLD mode, and then SLEEP mode after 1 minute.
Battery charging. When the battery charger is connected, the battery status indicator
flashes all 3 bars to indicate charging. At the end of charging the battery status indicator will
stop flashing and show 3 bars continuously.
Battery charging error. Bottom 2 bars showing continuously and top bar flashing at the end
of charging indicates a charging error. Disconnect and reconnect the charger. If the error
persists, this may indicate a fault with the pump, battery pack or the charger. Contact SKC
Limited customer services for assistance.