SKC Limited Pocket Pump MTX - Manual (Page 14)

Page 12 210-PMTXM Issue F www.skcltd.com
Getting Started
3) Accessing the Pump Keypad
To access the pump keypad, slide the slide cover downwards until the buttons are exposed.
4) Operating the Three Button Keypad
The Pocket Pump operates by pressing various sequences of the three keypad buttons:
Star Button -
• Scrolls through run time data on the LCD screen.
• Sets up the pump operating parameters when used with other buttons.
Up and Down Arrow Buttons -
• Increases or decreases either the flow rate (in constant flow mode) or the pump back pressure (in constant
pressure mode) during setup.
Underlined Sequence -
• All buttons in the sequence must be pressed consecutively within 10 seconds of the previous command.
Bracketed Sequence - [ ]
• All buttons within the brackets must be pressed simultaneously.
Security code -
• The security code sequence is required to access the operating parameters, thus preventing unauthorised
changes to the parameters and flow rate or back pressure settings.
5) SLEEP Mode
If the pump is left in HOLD mode for longer than five minutes the pump will automatically set itself to a low