SKC Limited Pocket Pump MTX - Manual (Page 17)

www.skcltd.com 210-PMTXM Issue F Page 15
Operating the Pocket Pump in Constant Flow Mode
Constant Flow mode provides compensated flow control for single sorbent tube sampling applications.
Ensure that the pump is set to Constant Flow mode before carrying out sampling.
1) Viewing the Run-Time Data
Press to scroll through the available run-time data screens:
Elapsed run time since last reset in minutes up to 9999 minutes (approximately 1
week). Above 9999 minutes display reverts to 0 minutes and continues to count.
Flow rate in millilitres/minute.
Accumulated sample volume since last reset in millilitres or litres up to 9999 litres.
Pump back pressure in inches of water or millimetres of mercury. Enhanced Display
mode only.
Sample air temperature in °C or °F. Enhanced Display mode only.