Harrington Hoists and Cranes MR Trolley - (MR2) User Manual
Page 36
Improper operation of a hoist can create a potentially hazardous
situation which, if not avoided, could result in minor or moderate
injury, or property damage. To avoid such a potentially hazardous
situation THE OPERATOR SHALL:
•
Maintain a firm footing or be otherwise secured
when operating the hoist.
•
Check brake function by tensioning the hoist prior
to each lift operation.
•
Use hook latches. Latches are to retain slings,
chains, etc. under slack conditions only.
•
Make sure the hook latches are closed and not
supporting any parts of the load.
•
Make sure the load is free to move and will clear all
obstructions.
•
Avoid swinging the load or hook.
•
Make sure hook travel is in the same direction as
shown on controls.
•
Inspect the hoist regularly, replace damaged or
worn parts, and keep appropriate records of
maintenance.
•
Use the hoist manufacturer’s recommended parts
when repairing the unit.
•
Lubricate load chain per hoist manufacturer’s
recommendations.
•
NOT use the hoist load limiting or warning device to
measure load.
•
NOT use limit switches as routine operating stops.
They are emergency devices only.
•
NOT allow your attention to be diverted from
operating the hoist.
•
NOT allow the hoist to be subjected to sharp
contact with other hoists, structures, or objects
through misuse.
•
NOT adjust or repair the hoist unless qualified to
perform such adjustments or repairs.
36