Harrington Hoists and Cranes MR Trolley - (MR2) - Manual (Page 51)

9.0 Parts List
When ordering parts, please provide the trolley code number, lot number and serial number located on the hoist
name Plate (see fig. below).
Reminder: Per sections 1.1 and 3.6.1 to aid in ordering parts and product Support, record the trolley code
number, lot number and serial number in the space provided on the Cover of this manual.
MR2 Series Name Plate
The parts list is arranged into the following sections:
Section 1/8 to 5 Ton Page
9.1 Electric Parts – 1/8 to 5 Ton………………………….………………………………...……….... 52
9.2 Pendant Parts – 1/8 to 5 Ton …………………………………………………………………….. 58
9.3 Power Supply Parts – 1/8 to 5 Ton ……………………………………………………….….….. 60
9.4 Side Plates and Suspension Parts – 1/8 to 5 Ton ………………………………………....….. 62
9.5 Motor Parts – 1/8 to 5 Ton ………………………………………….……………………….……. 64
Section 8 to 20 Ton
9.6 Motor Parts – 8 to 20 Ton ……………………………………….…………………………….…... 66
9.7 Side Plates and Suspension Parts – 8 to 20 Ton …………………………………………….… 68
9.8 Electric Parts – 1/8 to 20 Ton …………………………………………………………….….…… 70
9.9 Pendant Parts – 8 to 20 Ton ………………………………………….……………………….…...72
9.10 Optional Parts – 8 Ton ………………………………………….……………………….…………74
In the column "Parts Per Trolley" a designator is used for parts that apply only to a particular model or option.
Refer to Section 2 for MR2 Trolley model numbers and additional descriptions.
The designators are:
S = Single Speed W = SS/SS = Single Speed Hoist, Single Speed Trolley
D = Dual Speed X = SS/DS = Single Speed Hoist, Dual Speed Trolley
PC = Plug Connection Y = DS/SS = Dual Speed Hoist, Single Speed Trolley
DC = Direct Connection Z = DS/DS = Dual Speed Hoist, Dual Speed Trolley
2V = 208/230 Volt Models 4V = 460 Volt Models
51