Hochiki FIRElink-100 - Manual (Page 23)

FIRElink-100 – Installation Manual Page 23 of 40
© 2010 Hochiki Europe (UK) Ltd
9-5-0-345/ISS4/OCT10
confirmed to be within the class limits shown above. The settings of a compliant system should be
recorded, as it is possible by changing certain programmable functions to make the system non-
compliant. If functions are changed, it is recommended that the system is retested if continuing
compliance is in any doubt.
*The results should be verified at installation by entering the installed detector's Fire 1 sensitivity (as
indicated in the remote software histogram screen) into the PipeCAD “Options/Calculation
options/Detector sensitivity” field and recalculating the layout results.