Hochiki FIRElink-100 - Manual (Page 6)

Page 6 of 40 FIRElink-100 – Installation Manual
© 2010 Hochiki Europe (UK) Ltd
9-5-0-345/ISS4/OCT10
Hochiki Europe has taken every care to ensure that FIRElink-100 is as simple to install as possible but in
case of difficulty, please contact our Product Support Department to ensure trouble free installation and
operation. Hochiki Europe takes no responsibility for damage or injury occasioned as a result of failing to
install or operate the equipment in accordance with these instructions.
1.1 Indicators
OK. Illuminates to show
normal operation when
there are no faults. The
OK lamp will flash during
the 15 minute
Fastlearn™ period when
the detector is first
learning about its
environment. Fault. Illuminates
when the unit has a
fault and a fault
signal is being sent
to the fire alarm
panel. Fire. Illuminates when the alarm level has been
reached and the appropriate time delays have
expired.