IAI America SEP-PT - Manual (Page 17)

11
2. Description of Each Section
(1) Touch Panel Operation Display Screen
This section consists of the STN monochrome LCD and touch panel.
Editing of various set values and teaching descriptions are displayed.
The operation is available by means of touching
(Note 1)
the touch panel using your finger or
touch pen.
(Note1) The analog resistance film system is used for the touch panel. Therefore, do not
touch two locations or more on the touch panel simultaneously.
In the case that two or more locations are touched simultaneously, the intermediate
points of such two or more locations may react and the operations be started.
(Note2) Do not operate the touch panel with a force greater than 0.5N. If the touch
panel is operated with the force greater than that, it may be broken.
(Note3) The life of a touch panel may be about 1 million times pressing the same
positions (in the use environment at the temperature of 25
qC).
(2) EMERGENCY STOP (Emergency Stop Pushbutton Switch)
Using this button, the machine is stopped in an emergency.
(3) Touch Pen
This touch pen is used to touch the touch panel operation display screen.
(4) Wall Hook
This hook is used to hang the unit from the wall.
(5) Strap Set Section
The strap (option) is attached to this section.
(4)Wall Hook
(3)Touch Pen
(2)EMERGENCY STOP
(Emergency Stop Pushbutton Switch)
(1)Touch Panel Operation
Display Screen
(5)Strap Set Section
(Note) Do not open this cover.