IDEC SE4D Type 4 Hand - Manual (Page 18)

17
Function Setting
3-2-1 Fixed Blanking Function
(Sub sesnor 2)
1. Fixed blanking
function
2. To Floating
blanking
function
Select function
(Ineffective)
(Clear setting)
(Effective)
(Auto setting)
(Effective)
(Manual setting)
(All sensors)
(Main sensor)
(Sub sesnor 1)
Select sensor
(Clear setting) Send
(Error)
To 1
Input
password
OK
NG
(Sub sensor 2)
(Main sensor)
(Sub sensor 1)
(Effective)
(Ineffective)
(Auto setting) Send
(Error)
To 1
To 1
To 2
Select sensor Check result
Keep pressing
switch OK
It is possible to
check ON / OFF of
all beam channels
Input
password
OK
NG
Select “send”
(Error)
To 1
Send
Input
password
Select beam channel Setting
Manual
setting
OK
NG
Once a password
is input, it is not
necessary to input
it again till the
power is turned
OFF.
Beam channel No.
First beam
channel
Second beam
channel
Effective beam
channel
Ineffective beam
channel
The beam channel No. is given with 1, 2, 3･･･from
the bottom.
Beam channel No.
3
2
1
Beam channel
No.
Emitter
Receiver
*: The functional setting for each beam channel is as follows.
on : The fixed blanking function is effective.
oFF : The fixed blanking function is ineffective.
key operation
: FUNCTION
: ENTER
: CANCEL
: -
: +