IDEC SE4D Type 4 Hand - Manual (Page 35)

1. CAUTIONS FOR SAFE USE
(1) The applications shown in the catalogue are only suggestions, and it is Purchaser's sole responsibility to
ascertain the fitness and suitability of the Products for any particular application, as well as to abide by
Purchaser's applicable local laws and regulations, if any.
(2) Never use the Products NOT rated or designated as “SAFETY SENSOR” in any application involving risk to life
or property. When such a use is made by Purchaser, such Purchaser shall indemnify and hold harmless IDEC
from any liability or damage whatsoever arising out of or in relation to such use.
(3) In incorporating the Products to any equipment, facilities or systems, it is highly recommended to employ
fail-safe designs, including but not limited to a redundant +++design, flame propagation prevention design,
and malfunction prevention design so as not to cause any risk of bodily injury, fire accident, or social
damage due to any failure of such equipment, facilities or systems.
(4) The Products are each intended for use only in environments commonly found in manufacturing industry,
and, unless expressly allowed in the catalogue, specification or otherwise, shall not be used in, or
incorporated into, any equipment, facilities or systems, such as those:
(a) which are used for the protection of human life or body parts;
(b) which are used outdoors or in environments subject to any likelihood of chemical contamination or
electromagnetic influence;
(c) which are likely to be used beyond the limits of operations or environments specified by IDEC in the
catalogue or otherwise;
(d) which may cause risk to life or property, such as nuclear energy control equipment, transportation
equipment (whether on rail or land, or in air or at sea), and medical equipment;
(e) which are operated continuously each day for 24 hours; and
(f) which otherwise require a high level of safety performance similar to that required in those equipment,
facilities or systems as listed in (a) through (e) above.
2. EXPORT CONTROL LAWS
In some jurisdictions, the Products may be subject to local export laws and regulations. If any diversion or re-export is
to be made, Purchaser is advised to abide by such local export laws and regulations, if any, at its own responsibility.