Teledyne LeCroy HFP1000 - Manual (Page 16)

HFP1000 High Frequency Probe
10 922251-00 Rev A
Tips, continued
SMD D ISCRETE T IP
The crescent shape of this tip is designed to fit tightly on capacitors,
resistors, transistors and other surface mount components with
discrete leads. Fits in either probe socket.
The SMD Discrete Tip is an optional accessory for the HFP1000.
PACC-PT004, package of 4.
B ENT S HARP T IP
Made out of titanium, this tip is ideal for situations that require the
user to hold the probe parallel to the circuit board under test. Also
gives the user more control when holding the probe like a pencil.
Fits in either probe socket.
The Bent Sharp Tip is an optional accessory for the HFP1000.
PACC-PT005, package of 4.
Clips
M ICRO C LIP (0.5 MM )
A pincher like tip designed to hold onto fine pitch leads and small
components, commonly found in SMD ICs. Fits in either probe
socket, or can be used with a lead.
The Micro Clip is an optional accessory for the HFP1000.
PACC-CL001, package of 4.