Teledyne LeCroy HFP1000 User Manual
Page 19
Operator’s Manual
922251-00 Rev A
13
Probe Holder
The FreeHand Probe Holder lets you focus on the oscilloscope
screen instead of on maintaining contact to multiple test points.
It allows the user to concentrate on what is really important –
the waveform.
It is designed to keep most of the weight on the probe tip and
will prevent lost contact when a bump to the table shakes the
circuit under test.
Additionally, the HFP probe can be mounted horizontally or
vertically in the FreeHand, giving added measurement flexibility.
The FreeHand probe holder is an optional accessory for the
HFP1000.
PACC-MS001, package of 1.
To use the FreeHand probe holder
1. Slide the probe cable through the slot on the bottom of the
translucent holder section.
2. Slide probe backwards in the probe holder.