Teledyne LeCroy HFP1000 - Manual (Page 24)

HFP1000 High Frequency Probe
18 922251-00 Rev A
Replacement Parts
The probe connection accessories and other common parts can be ordered through the regional
customer care centers. Refer to list below for Teledyne LeCroy part numbers. Defective probes can
be replaced on an exchange basis. The replacement exchange probe will have been factory repaired,
inspected and calibrated to the same standards as a new product. In order to obtain an exchange
probe, you must return the defective probe. The returned probe should be sent back to the regional
customer care center without any accessories, manual or case.
Table 1 Replaceable Parts List
Item Teledyne LeCroy P/N Replacement QTY
Straight Tip PACC-PT001 4
Sharp Tip PACC-PT002 4
IC Lead Tip PACC-PT003 4
SMD Discrete Tip PACC-PT004 4
Bent Sharp Tip PACC-PT005 4
Micro Clip PACC-CL001 4
Clip PK006-4 2
Ground Spring with Hook PACC-LD001 4
Square Pin Ground Spring PACC-LD002 4
Offset Pin 405400003 1
Short Right Angle Lead PACC-LD003 4
Long Right Angle Lead PACC-LD004 4
Short Single Lead PACC-LD005 4
FreeHand Probe Holder PACC-MS001 1
Replaceable Cartridge PACC-MS002 1
Low C Cartridge PACC-MS003 1
Soft Accessory case SAC-01A 1
Instruction Manual 922251-00 1