Specifications, Nominal characteristics – Teledyne LeCroy HFP2500 User Manual
Page 10
HFP2500 High Frequency Probe
4
922253-00 Rev
A
Leaf Pogo Ground Assembly
1
Pogo Ground Lead
2
Pivot Ground Lead
2
FreeHand Probe Holder
1
Soft Accessory Case
1
Instruction Manual
1
Certificate of Calibration
1
For part number information refer to page 18, Replaceable Parts List.
Specifications
Nominal Characteristics
Nominal characteristics describe parameters and attributes that are guaranteed by design, but do
not have associated tolerances.
Input Dynamic Range
±8 V
Offset Range
±12 V 1
Maximum Input Voltage
1
40 V pk
Attenuation
÷10
Output Connector
ProBus
Interface
ProBus
Oscilloscope Full Compatibility
All Teledyne LeCroy WaveRunner and Wave
Pro oscilloscopes, and LC series
oscilloscopes with firmware version 8.7.0 or
higher.
1
Subject to input voltage vs. frequency derating. See Figure 1.