Teledyne LeCroy HFP2500 - Manual (Page 14)

HFP2500 High Frequency Probe
8 922253-00 Rev A
Accessory Descriptions
The following Tip and Clip accessories can be pushed into the
probe tip socket, ground socket or any other socketed lead or
adapter.
Tips
S TRAIGHT T IP
The straight tip is rugged and designed for general probing. Fits in
either probe socket.
PACC-PT001, package of 4.
S HARP T IP
Rugged, titanium tip designed to connect to the smallest vias and
small test points. Fits in either probe socket.
PACC-PT002, package of 4.
IC L EAD T IP
Covered in insulation on all sides (except for a small edge), this tip
was designed to prevent shorting neighboring IC leads. The gold
part of the tip is not insulated and should touch the IC lead to be
tested. It is one-size-fits- all and will work with any IC lead pitch.
Fits in either probe socket.
PACC-PT003, package of 4.