Teledyne LeCroy HFP2500 - Manual (Page 18)

HFP2500 High Frequency Probe
12 922253-00 Rev A
Probe Holder
The FreeHand Probe Holder lets you focus on the
oscilloscope screen instead of on maintaining contact to
multiple test points. It allows the user to concentrate on
what is really important – the waveform.
It is designed to keep most of the weight on the probe tip
and will prevent lost contact when a bump to the table
shakes the circuit under test.
Additionally, the HFP probe can be mounted horizontally or
vertically in the FreeHand, giving added measurement
flexibility.
PACC-MS001, package of 1.
To use the FreeHand probe holder
1. Slide the probe cable through the slot on the bottom of
the translucent holder section.
2. Slide probe backwards in the probe holder.