Teledyne LeCroy Kibra DDR User Manual
Page 111
Advertising
Kibra DDR Protocol Analyzer User Manual
109
Waveform View
Teledyne LeCroy
Figure 3.12: Enabling/Disabling Zoom Box Mode
Perform the following steps to use the Zoom Box:
1. Click on the Enable/Disable Zoom Box Mode button to activate it as shown in the
screen capture above.
2. When you move the cursor in the Waveform View display it will change to a + (Plus)
sign.
Figure 3.13: Overlaying One Signal over the Other
3. Drag the cursor to select the area to zoom in (see
).
Zoom Box Mode button. When activated the button turns blue.
Cursor changed to a + (Plus) sign to
zoom into an area
Advertising