Teledyne LeCroy IBTracer 4X - Users Manual Ver.2.20 User Manual
Page 53
Advertising
45
IBTracer 4X Protocol Analyzer User’s Manual
CATC
SW Version 2.2
Step 2
From the OpCode list, choose RC, UC, RD, UD, or Any:
Step 3
From the second list, select one of the available choices:
Step 4
Choose and ACK type:
Step 5
For ACK, enter information in the Syndrome bits field and
optionally check the "MSN Valid" (Message Sequence Number)
box:
RC = Reliable Connection
UC = Unreliable Connection
RD = Reliable Datagram
UD = Unreliable Datagram
Any = Any connection/datagram
ACK = Acknowledged
NAK = Negative Acknowledged
RNR NAK = Receiver not ready
Advertising
This manual is related to the following products: