Teledyne LeCroy IBTracer 4X - Users Manual Ver.2.20 - Manual (Page 58)

50
IBTracer 4X Protocol Analyzer User’s Manual CATC SW Version 2.2
Data Pattern
Clicking Data Pattern allows you to edit the Data Pattern on a bit-by-bit
basis.
Enter a pattern of up to 16 words (256 bits) in the box located above the Edit
button. This will set the Analyzer to trigger on the first instance of the
pattern anywhere within the first 256 bits of the payload.
To define one or more patterns in specific locations within the payload, click
the Edit button. A pattern editor will open that will let you enter data
patterns on a bit by bit basis for up to eight dwords.