Actions window layout – Teledyne LeCroy IBTracer 4X - Users Manual Ver.2.20 User Manual
Page 63
55
IBTracer 4X Protocol Analyzer User’s Manual
CATC
SW Version 2.2
Actions Window Layout
The Actions window displays three groups of buttons that can be connected
by dragging the mouse: Event buttons, Action buttons, and Counters.
Event Buttons
Event buttons represent the events you selected in the Events window.
These buttons are created automatically when you make your choices in the
Events window. If no events are selected, no Event buttons will appear.
By default, Event buttons are connected to the Trigger button.
Action Buttons
Buttons marked Trigger, Filter In, Filter Out, and Restart are Action
buttons. These buttons determine the outcome of an event.
Trigger Button - Triggers the end of the recording when an event occurs.
Filter In and Filter Out Buttons - Tells the Analyzer to filter in or out
events from the recording. Filtering lets you exclude unwanted
traffic so that you can preserve recording memory and thereby
increase amount of desired traffic in your trace.
Restart - This button is used to restart Counts and Event Sequences. See
below for an explanation of Counts and Event Sequences.
Counters
Action
Buttons
Event
Buttons