Teledyne LeCroy IBTracer 4X - Users Manual Ver.2.20 - Manual (Page 69)

61
IBTracer 4X Protocol Analyzer User’s Manual CATC SW Version 2.2
Counters have blue dots in their top left corner that provide access to pop-up
menus. The menus provide the means of setting the counter value. The
counter can be set between 1 and 65,535.
To connect an event to a counter, follow these steps:
Step 1
Click the Event tab and select an Event such as Error.
Selecting an event causes an Event button to automatically appear
in the Actions tab.
Step 2 Click the Actions tab.
The tab displays an event button that is connected to the Trigger
button on the right.
Step 3
Click the Event button.
An arrow appears that connects the Event button to your mouse
pointer.
Step 4
Click one of the two counters.