Teledyne LeCroy IBTracer 4X - Users Manual Ver.2.20 User Manual
Page 59
Advertising
51
IBTracer 4X Protocol Analyzer User’s Manual
CATC
SW Version 2.2
Breakout Board Data
Clicking "Breakout Board Data" causes a text field to appear that allows you
to specify a pattern for the matching bits for the pins marked Data0 through
Data7 on the UPAS breakout board. To use the breakout board, you will
need to connect a DB-25 RS-232 cable to the connection marked Data
In/Out on the back of the UPAS. Then use alligator clips to connect the data
pins on the breakout board to the RS 232 cable.
Advertising
This manual is related to the following products: