Teledyne LeCroy PETracer PCI Express Edge User Manual - Manual (Page 181)

PETracer Edge User Manual Chapter 10: Updates and Licensing
Teledyne LeCroy
173
Chapter 10: Updates and Licensing
10.1 Updating the Card
BusEngine™ and/or Firmware updates are now automatic processes that run anytime a
new version of the PETracer™ software is installed that is incompatible with the currently
installed BusEngine or Firmware. The update process generates on-screen instructions.
If, however, you need to manually perform BusEngine or Firmware updates, follow these
steps:
Step 1 Select Setup > Update Device … from the menu to display the
Update PETracer Edge dialog box for PETracer Edge:
Step 2 Select the appropriate file locations for the Firmware and/or BusEngine,
using Browse, if necessary.
Step 3 Check the appropriate options (if in doubt, check all options).
Step 4 Click Update to initiate the updating of the Edge card.