Teledyne LeCroy PETracer PCI Express Edge User Manual - Manual (Page 70)

Chapter 6: Searching CATC Traces PETracer Edge User Manual
62
Teledyne LeCroy
Attaching Markers
You can attach a discrete piece of information/data to a
marker, for example, a text description or file, an attachment
of a trace file by a predefined order, video or audio files, URL
links or any other files. You can also remove an attachment
from a Marker.
Adding an Attachment
Perform the following steps to add an attachment to a
marker:
1. Right‐click on any cell in the trace and select Set
Marker.
The Create Marker window displays.
2. Click on the Add icon.
The Add File to the Marker dialog displays.
3. Go to the file and select it to add it to the marker as an
attachment.
4. Click Open.
The file will appear in the Create Marker for Transfer...
dialog as shown below. The Marker # appears in the top
panel, the icons are displayed in the second panel and
you can click on the icon on the third panel to view the
file you are about to attach.
5. Click OK to add the attachments.