4 go to time, 5 go to marker, 4 go to time 6.5 go to marker – Teledyne LeCroy PETracer PCI Express Edge User Manual User Manual
Page 66
Advertising
Chapter 6: Searching CATC Traces
PETracer Edge User Manual
58
Teledyne LeCroy
6.4 Go to Time
To position a
specific time
at the top of the screen:
Step 1 Select Go to Time from the Search menu. A pop-up menu prompts you
for the time in Seconds or Clocks.
Step 2 Enter the time and format (seconds or clocks).
Step 3 Click Go.
6.5 Go to Marker
Use this operation to go directly to a specific packet that has
been marked with a unique marker by the Set Marker
operation.
To go to a marker:
1. Select Go To Marker from the Search Menu.
2. Select the marker you want from the fly‐out menu.
Alternatively, select All Markers to display the All
Markers window, then select a marker and click Goto.
Advertising