Teledyne LeCroy PETracer PCI Express Edge User Manual - Manual (Page 33)

PETracer Edge User Manual Chapter 4: Software Overview
Teledyne LeCroy
25
Multi-Segment Toolbar
File Information
Lists the conditions under which
the recording was made. Bus Utilization
Opens a window that graphically represents
various information about the recording.
Error Report
Opens a window that lists all errors
identified in the recording. Link Tracker
Opens a window that displays symbol information
per lane.
Traffic Summary
Opens a window that lists all
events that occurred during the
recording Opens the Data Flow window.
Shows recorded data in a compressed tabular
format.
Navigator. Shows/hides the
Navigator bar - a utility that lets you
easily navigate the CATC Trace. LTSSM Flow Graph 
Shows a state diagram of the LinkTraining
and Status State machine.
Displays the Data/Payload
window for the current packet.
Displays the Packet Header bar.
Opens a window that displays the header
information in the current packet, as it would be
viewed in the specification.
Opens the Timing and Bus Usage
Calculations window. Running Verification Scripts
Opens a dialog that allows you to select and run
verification scripts.
First Segment. Open first segment
in the multisegment CATC Trace. Index file. This button becomes active if a
multisegment CATC Trace file is open and will
display the index file for the recording.
Previous segment. Open previous
segment in the multisegment
CATC Trace. Next Segment. Open next segment in
multisegment CATC Trace.
Last segment. Open last segment in
multisegment CATC Trace.