Teledyne LeCroy PETracer PCI Express Edge User Manual - Manual (Page 46)

Chapter 4: Software Overview PETracer Edge User Manual
38
Teledyne LeCroy
Step 5 Click OK at the bottom of the Recording Options dialog box to apply the
Analyzer recording settings specified. 
Step 6 Click the Record button.
Stopping a Recording
You can stop the recording process at any time by pressing the Stop button . This
causes the Analyzer to stop the recording and upload the CATC Trace to the host
machine. If you press the Stop button again, the Analyzer temporarily halts the upload
process and opens the following dialog box:
This dialog presents options for stopping, continuing, or aborting the upload:
• Stop: Aborts further CATC Trace upload and displays whatever CATC Trace data
that has already been uploaded.
• Continue: Resumes the upload. This command tells the Analyzer to finish
uploading whatever CATC Trace data is still in its buffer.
• Flush: Flushes the CATC Trace without saving or displaying it.
If you allow the traffic data to be uploaded, it is automatically saved on the host machine’s
hard drive as a file named data.pex or the name you assign as the default filename in the
recording options.
Saving a Recording
Step 1 To save a current recording for future reference, select Save As from the
File menu.
Step 2 Give the recording a unique name, then save it to the appropriate
directory.