Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 170)

LeCroy Corporation Target and Device Emulation
168 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
Sending Identify Frame
Check the Send option button, then specify the number of Identify frames to send (and a
delay, if needed). 
Not to send Identify frames, check the Do not send identify frames option button.
Frame Type Error
Check this to send a Frame Type error.
Frame Length Error
Check Frame Length error and enter the number of DWORDs in the corresponding text
box.
SOAF, EOAF and CRC
Check any or all and check the criteria for introduction.
Code violation and Disparity
Check either or both and specify DWORD offset and Number of DWORDs in the
corresponding text boxes.
Connection Management (SAS only)
Click the Connection Management icon in the Errors window to display the Connection
Management Setting dialog.
Figure 2.174: SAS: Connection Management Setting Dialog