Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual User Manual
Page 98
Advertising
LeCroy Corporation
Easy Mode (Pre‐Defined Setups)
96
Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
Choose Port Speed
The default speed is Autospeed. You can also select the port speed from the
drop‐down list: 1.5 Gbps, 3.0 Gbps, or 6.0 Gbps.
Note:
If a Port ID check box has no check, the analyzer does not capture any patterns for that port. The
system allocates trace memory for that port to its adjacent port, for example: I1, T1 <‐> I2, T2 or
I3, T3 <‐> I4, T4.
Ports Configuration
Select the Port Configuration button to display the Set Port Configuration dialog.
Figure 2.69: SAS: Set Port Configuration Dialog
Advertising