Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual User Manual
Page 68
Advertising
LeCroy Corporation
Easy Mode (Pre‐Defined Setups)
66
Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
FIS Pattern (SATA only)
Double‐click FIS Pattern to open the FIS Pattern selection dialog.
Figure 2.26: FIS Pattern Dialog
SAS vs. SATA: Not available in SAS.
The FIS Pattern dialog opens with the default FIS Type as Register Host to device. To
choose another available FIS Type, click the down arrow next to the FIS Type list box.
Figure 2.27: FIS Pattern Dialog Dropdown
SAS vs. SATA: Not available in SAS.
Choose a FIS Type and complete the corresponding dialog.
Advertising